Lamineries MATTHEY produces thin strips in a multiplicity of alloys according to demanding specifications and frequently complex requirements. They cater to the needs of the customer by producing medium to small quantities depending on specific properties. The thickness of standard strips ranges from 5 microns to 2 millimeters (0.0002" to 0.08"). At Lamineries MATTHEY, strips are generally cut in widths of 1 to 230 mm (0.04"to 9.0") and redressed foils in standard lengths of 0.5 to 3 m (1.64 to 9.38 feet). If you are looking for thin strips in stainless steels, in cobalt alloys (Phynox, Duratherm), in nickel alloys or in other HP alloys, you have now the right address. The standard assortment of rods and wires includes diameters from 0.4 to 25 mm (0.015" to 1.0"), thereby offering a large stock of articles. Thanks to their expertise and their large spectrum of alloys, Lamineries MATTHEY are able to advise their customers in the selection of material, technical feasibility, processing and treatment of the products and the recycling of waste material.