Jumperkits - The most affordable electrical test probes and leads for automotive electrical connectors •Used with multimeters and other automotive diagnostic equipment •A variety of different size probes for automotive electrical connectors •Male and female probes are included in each size of test lead •Simplify automotive electrical diagnostics •Free up your hands from trying to hold test probes •Safely fit automotive pin and socket type electrical connectors •Prevent damage to terminals from inserting other probes •Reduce accidental shorts and avoid miss-reads •High quality, long lasting products since 2000! Jumperkits, LLC manufacturers sets of automotive electrical test probes. These test probes are used to help diagnose electrical problems in vehicles. They provide a means to connect test equipment to individual wires inside connector bodies found in the vehicle wiring harness. These probes consist of 4" long wires with male (pins) or female (sockets) on one end of the wire, and a common female spade terminal on the other end of the wire. The pins and sockets are the exact mating ends to fit the terminals found inside many common automotive electrical connectors. The common end of the wire (female spade end) is then connected to a long lead that has a banana plug on the opposite end that fits multimeters and scopes. The advantages of using a Jumperkit are as follows: •Using the correct mating pin or socket insures that you are not damaging the terminals in the connector body. Insertion of an improper probe can distort the terminal and lead to damage requiring that the terminal be replaced. •Using the correct mating probe reduces the possibility of shorting between terminals while testing. •The correct probe also reduces the error of a misread due to improper / loose fit. •Prevents damage to the wire itself when “back probing” or “piercing” type probes are used. •Frees up the technicians hands; no need to hold probes in place.